Cleaning & Drying Equipment
Industrial cleaning and drying solutions including ultrasonic cleaners, automated drying systems, and infrared/hot air drying chambers.
Category Overview
Industrial cleaning and drying solutions including ultrasonic cleaners, automated drying systems, and infrared/hot air drying chambers.
Key Advantages
- Thorough cleaning
- Energy efficient
- Automated process
Equipment List (5 Types)
Ultrasonic Cleaning Machine
Industrial Cleaning Machine
Automated Drying Equipment
Infrared Drying Chamber
Hot Air Circulation Drying Chamber
Application Scenarios
Precision Parts Cleaning
Multi-tank ultrasonic cleaning systems for machined parts, optical components, and medical instruments. Sequential washing, rinsing, and drying stages remove oils, chips, and particulates to specified cleanliness levels.
Post-Plating Drying
Hot air circulation and infrared drying chambers for electroplated and anodized parts. Controlled temperature profiles prevent water spots and ensure uniform drying without thermal damage to coatings.
Pre-Assembly Cleaning Lines
Automated cleaning lines integrated before assembly or painting processes. Spray, immersion, and ultrasonic stages combined with DI water rinse ensure surface preparation meets adhesion requirements.
Case Studies
Ultrasonic Cleaning Line for Hydraulic Valve Bodies
Hydraulic Component Manufacturer (Europe)
Challenge
Machined hydraulic valve bodies retained metal chips and cutting oil in internal passages, causing field failures. Manual cleaning was inconsistent and could not reach deep internal channels.
Solution
Delivered a 5-stage ultrasonic cleaning line with vacuum degassing, high-pressure rinse, and hot air drying. Custom fixtures rotate parts to expose all internal passages.
Result
Particle count reduced from ISO 18/16 to ISO 14/11, field failure rate dropped to zero over 12 months, and cleaning throughput reached 120 parts per hour.
Infrared Drying Chamber for Painted Components
Automotive Parts Coater (North America)
Challenge
Convection oven drying of painted bumper brackets took 45 minutes per batch, creating a bottleneck and requiring large floor space for the oven.
Solution
Replaced the convection oven with a compact infrared drying chamber using medium-wave IR emitters with zone temperature control, reducing drying time and footprint.
Result
Drying time reduced from 45 to 12 minutes per batch, floor space reduced by 60%, and energy consumption decreased by 40% due to targeted heating.
Need a Custom Solution?
Our engineering team can design and manufacture non-standard equipment tailored to your specific production requirements. Contact us to discuss your project.
Discuss Your Project